Motorola DSP96002 - Manual (Page 480)

A - 292 DSP96002 USER’S MANUAL MOTOROLA
RESET Reset Peripheral Devices RE-
SET
Instruction Fields:
None
Timing: 4 oscillator clock cycles
Memory: 1 program words
00 0000 0000 0100
31 14 13 0
0000 0000 0000 0000 00
Operation:
Reset all on-chip peripherals and
the Interrupt Priority Register.
Assembler Syntax:
RESET
Description:
All on-chip peripherals and the Interrupt Priority Register are reset. See Chapter 7 for a description of the
effect of the RESET instruction on the peripherals. The processor state is not affected and execution con-
tinues with the next instruction, but all maskable interrupt sources are disabled. The only interrupts that
can then occur are Stack Error, Hardware Reset, ILLEGAL, TRAPcc and FTRAPcc.
CCR Condition Codes: Not affected.
ER Status Bits: Not affected.
IER Flags: Not affected.
Instruction Format: RESET