Kyocera KM-C830 - Manual (Page 107)

Section 7 COPIER MANAGEMENT
7-12
2. Default settings
The state that the copier enters at the end of warm-up or when the
Reset key is pressed is called the “initial mode”. The modes, functions
and other settings that are automatically pre-set for the initial mode
are called “default settings”. These default settings are separated into
two categories: “Copy defaults” and “Machine defaults”. These default
can be changed as desired to suit your copying needs.
(1) Copy default settings
The following 24 copy default settings can be changed. Change any
or all of the settings as desired in order to make the most effective
use of your copier.
Default setting
1 Exposure mode
2 Exposure steps
3 Auto exposure
adjustment (color)
4 Auto exposure
adjustment (b/w)
5 Mixed original
density
6 Text original density
Description
Selects between auto exposure (page 4-3) and
manual exposure (page 4-3) as the default copy
exposure mode at the time power is turned on.
Changes the number of exposure steps in the
manual exposure mode.
Changes the overall exposure when using the auto
exposure mode for full color copies.
Changes the overall exposure when using the auto
exposure mode for black and white copies.
* The overall exposure when making mono-color
copies can be adjusted here as well.
(See page 5-1.)
Adjusts the exposure of the original when the
text&photo mode is selected for the image quality
(page 4-3).
Adjusts the exposure of the original when the text
mode is selected for the image quality (page 4-3).
Available settings
Auto / Manual
7 steps
13 steps
1 – 7
1 – 7
1 – 7
1 – 7
Factory
setting
Inch: Manual
Metric: AUTO
7 steps
4 (middle setting)
4 (middle setting)
4 (middle setting)
4 (middle setting)
Reference
page
7-17
7-17
7-17
7-17
7-18
7-18