Kyocera KM-C830 - Manual (Page 53)

Section 6 FUNCTIONS
6-6
With these modes, duplex (2-sided) copies can be made from a
variety of originals including open-faced (books, etc.) originals or
multiple one-sided originals.
NOTES
• These modes are only available in duplex copiers.
• 2-sided copies cannot be made automatically when paper is being
fed from the multi-bypass tray.
(1) Making duplex (2-sided) copies from a 2-sided
original
With this mode, a 2-sided original is copied and the front and back
sides of the copy paper are used so that the copy looks just like the
original.
NOTES
• Only paper sizes between 5 1/2 " x 8 1/2 " and 11" x 17" [between A5R
and A3] can be used in this mode.
• The optional DF must be installed in your copier.
(2) Making duplex (2-sided) copies from an open-faced
(books, etc.) original
With this mode, the two facing pages of a magazine or book are
copied separately onto the front and back sides of the copy paper by
simply pressing the Start key.
NOTES
• The binding direction of the originals can also be selected.
1 Left side binding: Open-faced originals are copied from the left
side page first.
2 Right side binding: Open-faced originals are copied from the right
side page first.
• Only 8 1/2 " x 11" and 11" x 8 1/2 " [B5, A4R and A4] paper sizes can
be used in this mode. (A4R paper can be loaded into the optional 2-
Drawer Paper Storage Unit, while B5 paper can be set onto the
multi-bypass tray.)
3. Making duplex (2-sided) copies from various types of originals
[2-sided copy modes]