Kyocera KM-C830 - Manual (Page 30)

Section 3 PREPARATIONS
3-8
2. Replacing the toner containers and the waste toner tank
This copier uses 4 colors of toner (yellow, cyan, magenta and black).
Replace the toner container for the indicated color whenever “Add
toner to resume copying.” appears. Be sure to replace the waste toner
tank each time you replace a toner container.
* Only replace the toner containers when the message tells you to do
so.
The illustrations in the following procedure will show replacement of
the black toner container.
1 Open the front cover.
2 Hold the toner container release lever (shown as 1 in the
illustration) down and pull the old container out.
3 Shake the new toner container 5 times or more from side to
side.
4 Insert the new container into the copier.
* Once it is inserted properly, the new container will lock into
place.
5 Insert the old container into the supplied disposable plastic
bag.
Follow this same procedure and replace the other toner containers,
as necessary.
1
CAUTION
DO NOT attempt to incinerate the toner containers or
the waste toner tank. Dangerous sparks may cause
burns.
CAUTION
DO NOT attempt to force open or destroy the toner
containers or the waste toner tank.