Kyocera KM-C830 - Manual (Page 31)

Section 3 PREPARATIONS
3-9
6 Operate the paper conveyor release lever and pull the paper
conveyor out towards you as far as it will go.
7 Push down on the waste toner tank release lever (shown as
2 in the illustration) and remove the waste toner tank.
IMPORTANT!
DO NOT turn the waste toner tank upside down after you remove it
from the copier.
8 Use the cap that is located on top of the waste toner tank to
seal to the opening in the tank.
9 Insert the old tank into the supplied disposable plastic bag.
2
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.
CAUTION
The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.
CAUTION
DO NOT attempt to incinerate the toner containers or
the waste toner tank. Dangerous sparks may cause
burns.
CAUTION
DO NOT attempt to force open or destroy the toner
containers or the waste toner tank.