Kyocera KM-C830 - Manual (Page 50)

Section 6 FUNCTIONS
6-3
4 Press the Enter key. The message display will return to the
“Ready to copy.” screen and the selected ratio will be shown
in the display.
NOTE
The magnification ratio can be entered directly using the numeric keys
on the keypad, or it can be changed in 1% increments using the
Zoom(+) and/or Zoom(-) keys.
5 Press the Start key to begin the copying procedure.
Inch specifications Metric specifications
(4) XY zoom mode
With this mode, it is possible for you to change the length and width of
the copy image separately. The magnification ratio can be set to any
1% increment between 25% and 400%.
1 Set the original to be copied.
2 Press the Digital Editing key to light the corresponding
indicator.
3 Use the M cursor or the N cursor key to select
“n XY Zoom” and then press the Enter key.
Inch specifications
Metric specifications
Inch specifications Metric specifications
Inch specifications Metric specifications