Kyocera KM-C830 - Manual (Page 90)

Section 6 FUNCTIONS
6-43
Up to seven combinations of copy modes and other functions
displayed on the operation panel can be registered as a single
program using this function.
(1) Registering a program
1 Set the desired copy modes, etc., to be registered on the
operation panel and return to the “Ready to copy.” screen.
2 Press the */Language key.
The “Default mode setting” [“SELECT SET ITEM”] screen will
appear.
3 Use the M cursor or the N cursor key to select “x Store
Program” [“x PROGRAM REGISTRATION”] and then press
the Enter key.
Inch specifications
Metric specifications
19. Memorizing frequently used settings [Program function]
4 Use the M cursor or the N cursor key to select the program
number under which you want to register the settings.
The program number can also be entered directly using the
numeric keys on the keypad.
Inch specifications
Metric specifications
NOTE
Pressing the P cursor key will display details of each setting. When a
program contains many settings, continue to press the P cursor key
in order to confirm the other settings. Press the O cursor key to return
to the previous screen.
5 Press the Enter key.
The message display will return to the “Ready to copy.”
screen.
Copying is now possible using the settings that were
registered under that program.
Inch specifications Metric specifications
Inch specifications Metric specifications