Kyocera KM-C830 - Manual (Page 97)

Section 7 COPIER MANAGEMENT
7-2
Procedure
● Clearing copy counts
● Printing out the department
code list
● Checking the copy counts
● Printing out the copy
management list
● Turning copy management
ON/OFF
● Turning printing management
ON/OFF
● Turning the printing error
report print out ON/OFF
Description
Perform this procedure when you want to clear the copy counts for all of the registered
department codes after a designated period of time. Copy counts cannot be cleared
individually, however.
Perform this procedure when you want to print out a list of all of the currently registered
department codes as well as the copy limit designated for each code.
Perform this procedure when you want to check the total number of copies made under all
department codes as a whole.
Perform this procedure when you want to print out a list of the number of copies made under
each department code.
Perform this procedure when you want to turn copy management ON or OFF, as desired.
Perform this procedure when you want to turn printing management ON or OFF, as desired,
for printing with the optional printer functions of this machine (printing management).
* This procedure is only available when the optional Printer Kit is installed in your copier.
When printing management is turned ON, you can have a report printed out automatically
whenever a department code mismatch error occurs. Turn this setting ON if you want the
report printed out automatically, and turn it OFF if you do not want to have the report printed
out.
* This procedure is only available when the optional Printer Kit is installed in your copier.
Reference
page
7-7
7-8
7-9
7-10
7-10
–
–