Kyocera KM-C830 - Manual (Page 42)

5-2
Section 5 COLOR COPY SETTINGS
Select the gloss mode when you want to make high-gloss copies.
NOTES
• This mode is only available when copying onto plain color copy
paper.
• This mode is NOT available with 2-sided copying.
• Copying will take more time than usual when the gloss mode is
selected.
• The effect from the gloss mode may not be evident with some types
of originals.
• Depending upon the type of paper and the ambient conditions,
paper may become wrinkled during printing with the gloss mode
selected. If this does occur, use slightly thicker paper that doesn't
wrinkle so easily or copy in a normal copy mode (cancel the gloss
mode).
• For a sample of copies made under the gloss mode, see “Gloss
mode samples” on page iii.
1 Press the Color Edit key to light the corresponding indicator.
2 Use the M cursor or the N cursor key to select “x Gloss”
and then press the Enter key.
Inch specifications
Metric specifications
3 Press the Enter key. The gloss mode will be selected and an
asterisk (
) will appear in front of the number for that
setting.
NOTE
In order to cancel the gloss mode, use the M cursor or the N cursor
key to select the gloss mode again and then press the Enter key.
The asterisk (
) will be removed and the setting canceled.
4 Use the M cursor key to select “z End” and then press the
Enter key. The message display will return to the “Ready to
copy.” screen.
Inch specifications Metric specifications
Inch specifications Metric specifications
2. Gloss mode