Kyocera KM-C830 - Manual (Page 143)

Section 9 TROUBLESHOOTING
9-10
1 Open the front cover.
2 Operate the paper conveyor release lever and pull the paper
conveyor out towards you as far as it will go.
3 Grasp the green handle (shown as 1 in the illustration) to
the left cover to the fixing unit and open that cover.
8 Replace the paper conveyor in its original position in the
copier.
9 Close the front cover.
* Be sure to hold both the left and right sides of the front
cover and close it securely.
4 Misfeed in the fixing section
If “Paper misfeed. Remove paper from Fixing unit.” is displayed and
the misfeed location indicator shown in the illustration lights, a
misfeed has occurred in the fixing section. Perform the following
procedure to remove the jammed paper.
1
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.
CAUTION
The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.