Kyocera KM-C830 - Manual (Page 73)

Section 6 FUNCTIONS
6-26
12. Adding covers and separation inserts to your copy sets
[Insert sheet modes]
There are two insert sheet modes: cover and separation insert.
NOTE
If you do not have a Memory Copy Board installed as standard
equipment, the optional Memory Copy Board must be installed in your
copier in order to use this mode.
(1) Insert sheet modes
● Cover mode
With this mode, paper fed from the multi-bypass tray is added as front
and back covers to the copy sets.
The front cover can be made into a 1-sided copy or be left blank. With
the back cover, you can select whether to copy onto the cover or not,
as well as whether or not to even including a back cover at all.
* Refer to the following table for the types of finished copies that each
combination of settings will make.
Back cover
Front cover
Copy on front
Blank
Blank No back cover Original
* The illustration shows the result when 1-sided copies are made.
Copy on front