Kyocera KM-C830 - Manual (Page 89)

Section 6 FUNCTIONS
6-42
7 Press the Enter key.
8 Press the Paper Select key and specify the paper size.
9 Set the original to be copied.
* If you set the originals in the optional DF, first set all of the
originals of the same size together.
10 Press the Start key. Scanning will start.
• If you set the original on the platen, go to the next step.
• If you set the originals in the optional DF, go directly to
step 12.
11 Replace the first original with the next one and press the
Start key. Scanning of that next original will start.
Carry out this step for all of the originals that you want to
copy and, once you have finished scanning them all, press
the Enter key. Copying will start.
12 Once all of those originals have been scanned, set the next
size of originals in the DF.
13 Press the Start key. Scanning of those originals will start.
* Repeat steps 12 and 13 for each different size of originals.
14 Once all of the originals that you want to copy have been
scanned, press the Enter key.
Copying will start.
Inch specifications Metric specifications
Inch specifications Metric specifications
Inch specifications Metric specifications