Kyocera KM-C830 - Manual (Page 92)

Section 6 FUNCTIONS
6-45
When you have selected the copy mode and other functions, etc., the
content of the settings that you have made can be confirmed using
this function.
1 Press the Program key.
2 Use the M cursor or the N cursor key to select “/ Recall”
and then press the Enter key.
Inch specifications
Metric specifications
3 Press the P cursor key in order to display the content of the
current settings on the operation panel.
Inch specifications
Metric specifications
4 Once you have finished checking the settings, press the
Enter key.
The message display will return to the “Ready to copy.”
screen.
20. Confirming copy settings (Recall function)
Inch specifications Metric specifications