Kyocera KM-C830 - Manual (Page 45)

5-5
Section 5 COLOR COPY SETTINGS
5. Adjusting the color hue
It is possible for you to change the color hue and create copies of
interesting colors. For example, turns reds into reddish-yellows or
yellows into yellow-greens.
NOTES
• These adjustments are only available with full color copying.
• These adjustments are NOT available in the auto exposure mode.
• These adjustments are NOT available in combination with one-touch
image quality adjustment.
• Selection is possible between the following settings:
All: Makes adjustment to the overall colors.
Y-B: Makes adjustment to the yellow and blue color wheel.
M-G: Makes adjustment to the magenta and green color wheel.
C-R: Makes adjustment to the cyan and red color wheel.
• These adjustments are especially effective for images with clear
colors.
1 Press the Color Edit key to light the corresponding indicator.
2 Use the M cursor or the N cursor key to select “b Hue” and
then press the Enter key.
Inch specifications
Metric specifications
3 Use the M cursor or the N cursor key to select the color
range to be adjusted.
Inch specifications
Metric specifications
4 Press the Enter key. The “Adjust Hue” screen will appear.
Inch specifications
Metric specifications
5 Use the O cursor or the P cursor key to adjust the hue for
that color range as desired.
NOTE
Adjustment is possible in 7-step increments between -3 and +3.
Inch specifications Metric specifications