Kyocera KM-C830 - Manual (Page 141)

Section 9 TROUBLESHOOTING
9-8
4 If paper can be seen on top of the conveyor section as well,
remove the paper without tearing it.
* If the paper does happen to tear, remove any loose scraps
from inside the copier.
5 Replace the paper conveyor in its original position in the
copier.
6 Close the front cover.
* Be sure to hold both the left and right sides of the front
cover and close it securely.
3 Misfeed in the transfer section
If “Paper misfeed. Open Front Cover.” is displayed and the misfeed
location indicator shown in the illustration lights, a misfeed has
occurred in the transfer section. Perform the following procedure to
remove the jammed paper.
1 Open the front cover.
2 Operate the paper conveyor release lever and pull the paper
conveyor out towards you as far as it will go.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.
CAUTION
The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.