Kyocera KM-C830 - Manual (Page 22)

Section 2 NAMES OF PARTS
2-5
´ Black&White key
(Press this key when you want to make monochrome [B/W]
copies. See page 4-1.)
‰ Full Color key
(Press this key when you want to make full color copies.
See page 4-1.)
ˇ Start key
(Press this key when the indicator is lit green and you want to start
copying.)
Á A.C.S. key
(Press this key when you want the copier to automatically make full
color copies from color originals, and black and white copies from
monochrome [B/W] originals. See page 4-1.)
¨ Copier key
(Press this key when you are using the optional printer functions,
scanner functions and/or fax functions of this machine and you
want to change to the copy operation mode.)
* The optional fax functions are only available for use in inch
specification copiers.
● Initial mode (at the end of warm-up or when the Reset key is
pressed)
Inch specifications
In the initial mode, paper of the same size as the original is selected
automatically (“auto paper selection mode”) and the magnification
ration is set to “100%” (1:1), the number of copies to be made is set to
“1”, “manual exposure mode” is selected for the copy exposure and
the image quality is set to “Mix” (text&photo mode).
* It is possible for you to change the default setting for the copy
exposure in the initial mode from the “manual exposure mode” to the
“auto exposure mode”. (See “
1 Exposure mode” on page 7-17.)
Metric specifications
In the initial mode, paper of the same size as the original is selected
automatically (“auto paper selection mode”) and the magnification
ration is set to “100%” (1:1), the number of copies to be made is set to
“1”, “auto exposure mode” is selected for the copy exposure and the
image quality is set to “Mix” (text&photo mode).
* It is possible for you to change the default setting for the copy
exposure in the initial mode from the “auto exposure mode” to the
“manual exposure mode”. (See “
1 Exposure mode” on page 7-17.)
● Auto clear function
About xx seconds after copying stops, the auto clear function will
automatically engage and the copier will return to the same settings
as those after warm up (initial mode settings). (However, the copy
exposure mode and the image quality mode will not change.) Copies
can continually be made using the same settings (copy mode,
number of copies and exposure mode) if the next batch of copying is
started before the auto clear function engages.
● Automatic drawer switching function
If two drawers contain the same size and orientation of paper and the
paper in one drawer runs out during copying, the automatic drawer
switching function will switch paper feed from the empty drawer to the
other drawer that still contains paper.
* The automatic drawer switching function can be turned OFF.
(See “ 2 Auto drawer switching ON/OFF” on page 7-28.)
* The automatic drawer switching function can also be used for
drawers that contain special paper or color paper. (In order to use
this function with those drawers, make sure that “On” has been
selected under “
5 APS for special paper ON/OFF” on page 7-29.)