Kyocera KM-C830 User Manual
Page 61
Advertising
Section 6 FUNCTIONS
6-14
17
Use the
O cursor or the P cursor key to select the desired
margin width.
Inch specifications
Metric specifications
NOTE
The margin width can be set to any 1/8" increment between 1/4" and
3/4" [1 mm increment between 1 mm and 18 mm].
18
Press the Enter key.
19
Use the
▲ cursor key to select “z Enter” and then press the
Enter key. The message display will return to the “Ready to
copy.” screen.
Advertising
This manual is related to the following products: