Kyocera KM-C830 - Manual (Page 70)

Section 6 FUNCTIONS
6-23
Multiple copies of the original image can be made onto standard copy
paper while the transparency + backing sheet mode (see page 6-21)
is selected. This mode is convenient for preparing materials to
accompany transparencies.
NOTES
• If your machine is a duplex copier, it is possible for you to make
duplex (2-sided) copies onto the standard copy paper.
• If you do not have a Memory Copy Board installed as standard
equipment, the optional Memory Copy Board must be installed in
your copier in order to use this mode.
(1) Copying onto the backing sheet
With this setting, after the original is copied onto the transparency and
the same image copied onto the backing sheet (see “(1) Copying onto
the backing sheet” on page 6-21), the same image will be copied onto
a specified number of sheets of standard copy paper as well.
(The asterisk “
∗” in the illustration indicates the transparencies.)
(2) Leaving the backing sheet blank
With this setting, after the original is copied onto the transparency but
the backing sheet left blank (see “(2) Leaving the backing sheet
blank” on page 6-21) the same image will be copied onto a specified
number of sheets of standard copy paper as well. (The asterisk “
∗” in
the illustration indicates the transparencies.)
1 Set the transparency film in the multi-bypass tray and select
the transparency mode.
NOTES
• Fan through the transparencies before setting them.
• Up to 25 transparencies can be set on the multi-bypass tray at one
time.
• Make sure that paper of the same size as the transparencies has
been loaded into a drawer.
2 Set the originals to be copied.
3 Press the Transparency Film / Card Stock key to light the
corresponding indicator.
4 Use the M cursor or the N cursor key to select
“z Transparency Mode” and then press the Enter key.
The “Select function” screen will appear.
Inch specifications
Metric specifications
Inch specifications Metric specifications
11. Preparing presentation materials to go with transparencies
[Presentation mode]