Konica Minolta BIZHUB PRO bizhubPRO920 User Manual
Copier
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- 1 Precautions for Installation and Use
- 2 Preparation for Use
- 3 Paper and Original Information
- 4 Supplies & Handling
- 4.1 Loading Paper
- 4.2 Loading Tabbed Sheets in Tray
- 4.3 Adding Toner
- 4.4 Inserting a New Staple Cartridge into Finisher FS-509
- 4.5 Inserting a New Staple Cartridge into Finisher FS-516
- 4.6 Inserting a New Staple Cartridge into Finisher FS-604
- 4.7 Empty Trash Basket of Punch Kit PK-505
- 4.8 Empty Trash Basket of Z Folding Unit ZU-602
- 4.9 Empty Trash Basket of Trimmer Unit TU-501
- 5 Troubleshooting
- 5.1 If “Please Call Service” Message Is Displayed
- 5.2 Clearing Mishandled Paper
- 5.3 If [Job List] Changes to [Mishandled Paper] or [No Paper]
- 5.4 If Memory Full Message Is Displayed (Memory Overflow)
- 5.5 If Power Off/On Screen Is Displayed
- 5.6 If No Response Screen Is Displayed
- 5.7 Troubleshooting Tips
- 6 Maintenance
- 7 Specifications
- 8 Before Making Copies
- 9 Basic Job Settings
- 10 Original Setting
- 11 Applications
- 11.1 Copy Conditions Incompatible with Applications
- 11.2 Application Screen
- 11.3 Inserting Sheets and Covers (Insert Sheet)
- 11.4 Locating Title Pages on the Front Side (Chapters)
- 11.5 Inserting Images into Printed Sets (Insert Image)
- 11.6 Copying onto Transparent Films (OHP Interleave)
- 11.7 Programming Different Settings for an Output Job (Program Job)
- 11.8 Dividing a Page Spread into Right and Left Pages (Book Copy)
- 11.9 Repeating Selected Image Area (Image Repeat: Size Manual Input)
- 11.10 Repeating Automatically or Select Repeating Times (Image Repeat: Size Auto Detect / Repeat)
- 11.11 Making Multiple Page Signature Booklet (Booklet Pagination)
- 11.12 Reversing Color in Black and White Image (Neg-/Positive Reverse)
- 11.13 Adjusting Position of Copy Image (Page Margin: Shift Mode)
- 11.14 Reducing Images to Create Binding Margin (Page Margin: Reduce & Shift Mode)
- 11.15 Eliminating Black Copy Marks Along Borders (Frame/ Center Erase)
- 11.16 Erasing Outside of Original (Non-Image Area Erase)
- 11.17 Copying Image in the Center of Copy Paper (Image Centering)
- 11.18 Printing Images Fully to the Edges (Full Scan)
- 11.19 Copying without Image Rotation (No Rotate)
- 11.20 Printing Stamp, Distribution Number, Page Number, Date/Time onto Copies (Stamp)
- 11.21 Printing Watermark onto Copies (Watermark)
- 11.22 Printing Words, Date/Time, Annotation Number onto Copies (Annotation)
- 11.23 Overlay an Image onto Each Page Copied in the Job (Image Overlay)
- 11.24 Storing Image on HDD / Overlaying Stored Image (Program Image Overlay)
- 12 Finishing / Paper Fold
- 12.1 Copy Conditions Incompatible with Finishing / Paper Fold Modes
- 12.2 Setting Binding Direction for Duplex Copies
- 12.3 Setting Output Face and Order
- 12.4 Sorting / Stapling Copies
- 12.5 Making Folded Booklet (Half Fold / Fold&Staple / Trimming)
- 12.6 Folding Copies in Three (Letter Fold In / Letter Fold Out)
- 12.7 Output Z-Folded Copies (Z-Fold)
- 12.8 Punching File Holes in Copies (Punch)
- 12.9 Cover Sheet Feeding (Post Inserter)
- 12.10 Using Finisher Manually
- 12.11 Using Two Copiers in Tandem
- 13 Job Management
- 14 Advanced Information
- 14.1 Checking Feature Selections by Proof Copying
- 14.2 Checking Feature Selections Before Copying (Check Mode)
- 14.3 Interrupt Copying
- 14.4 Storing and Recalling Job Conditions (Mode Memory)
- 14.5 Displaying Screen for Operation Guide (Help Mode)
- 14.6 Adjusting Response Time of Touch Keys (Accessibility)
- 14.7 Adjusting Touch Panel Contrast (Contrast)
- 14.8 Controlling Copier from Browser (Remote Panel)
- 15 Index