Printronix Series 5 - Manual (Page 104)

Configuration Menus 4–51
Char Set Select
CHARACTER SET specifies the print language used by the printer. Character
sets are shown in detail in the Character Sets Reference Manual .
Translation Table
TRANSLATION TABLE prints out a table of the twinax interface’s current
character set. This operation is valid only when the twinax interface is the current
interface.
Active Char Set
This option selects which group of character sets will be active.
Prt Partial Line
When this option is enabled, it forces the printer to print a partial line (i.e. line not
ending with a LF) before moving to the top of form on the next page. When
disabled, the last partial line of data will not be printed. After the emulation has
been changed, a POR status is sent to the host.
Device ID
This parameter defines the printer emulation, as follows:
•
5225
•
4234–2
Device Address
DEVICE ADDRESS allows you to set the device address from 0 through 6. The
host directs data and commands on the twinax line to a specific device based on
its unique device address. After the address has been changed, a POR status is
sent to the host.
5225 World Trade
The 5225 emulation has a multinational character set that serves as a base and
14 world trade character set assortments.