Printronix Series 5 - Manual (Page 27)

2–16 Setting Up the Printer
Interface Connections
Pedestal Model Cabinet Model
Network 10Base2 Network 10BaseT
Coax / Twinax
Data Products Longlines
Centronics 1
Auxiliary I/O
Serial
RS232/RS422
Centronics 1
Auxiliary I/O
Diagnostic
Serial
RS232/RS422
1 Not present on Network models
Diagnostic
90
°
BNC connector required for Coax
connection with the Power Stacker.
Optional Interfaces for Auxiliary I/O
Data Products Standard Adapter
1. Remove the cover from the I/O connector you have selected.
2. Attach the I/O cable connector to the printer interface connector.