Printronix Series 5 - Manual (Page 82)

Configuration Menus 4–29
Configuring the Emulation with the Control Panel
The settings, or configuration parameters, such as selecting the host interface
and parallel/serial data input, are adjusted according to the printer function key
descriptions in this manual. Configure the VGL as you would configure the printer
for other features.
You can select VGL default parameters directly from the control panel, or by
control codes as explained in the IGP/VGL Programmer’s Reference Manual .
The VGL parameters are described on the following pages. Parameters marked
with an asterisk (*) indicate the default value. The printer must be offline to enter
the configuration structure.
Pressing an invalid key to enter a parameter value may move you to another
level in the configuration or exit the configuration menu completely. Configure the
IGP/VGL according to your specific requirements.
IMPORTANT
!
BEFORE you reconfigure the IGP/VGL, print a
configuration sheet to see all of the current settings.