Printronix Series 5 - Manual (Page 150)

Configuration Menus 4–97
HOST INTERFACE Menu
( From 4–13 )
HOST INTERFACE
Centronics*
Serial Dataproducts
See page 4–100
See page 4–102 See page 4–104
Coax Twinax
IEEE 1284
See page 4–110
Available with
CT option Available with
CT option
* = Factory default
Ethernet 1
See page 4–111
1 Available when an Ethernet Adapter is present.
Auto Switching
See page 4–98
The Host Interface Menu enables you to select and configure one of seven types
of interface between the printer and your host computer. The currently selected
interface is indicated with an asterisk on the control panel message display. Each
interface has its own submenu, with the set of associated interface parameters
that you may configure.
IMPORTANT
!
When changing switching between Twinax, Coax, or Auto
Switching, the printer will load the saved configuration.
Thus, any setting performed before selection for those
interfaces and not saved will be lost.