Printronix Series 5 - Manual (Page 45)

3–6 Operating the Printer
ENTER – Selects the currently displayed option value as the active value. When
the display shows the desired configuration value, press and release to select
that value as the active value. An asterisk (*) appears next to the active value on
the display. ENTER also starts and stops printer tests and generates a
configuration printout. Press ENTER to start a printer test or configuration
printout. Press again to stop the printer test.
NOTE: The ENTER key must be unlocked in order to function.
UP or DOWN ( Y or B
) – Moves up and down between levels in the
configuration menus and makes vertical forms adjustment. After pressing VIEW,
press
Y
or
B
to adjust the paper up or down in 1/72 inch increments for fine
vertical forms alignment.
UP + DOWN ( Y + B
) – Locks and unlocks the ENTER key.
NOTE: The ENTER key lock and unlock function can be configured to be
other than
Y
+
B
(See page 4–93 ).
PREV or NEXT ( A or "
) – Moves between the options on the current level of
configuration menu. In the configuration menu. press A to scroll backward or
press " to scroll forward through the menu selections on the same level.
PREV + NEXT ( A + "
) When both keys are pressed simultaneously, the printer
will reset to the power–up configuration and reset its internal state.
Y
+ ON LINE (IPDS Emulation Only)
In offline mode, press
Y
+ ON LINE. If there is data in the IPDS printer buffer,
the printer will be placed in online mode, print one page, and return to the offline
mode. This action can be repeated until the end of a print job. Each time it prints
only one page. If no data are in the IPDS printer buffer, the printer will be placed
in online mode.
In the fault state,
Y
+ ON LINE does not work.