Printronix Series 5 - Manual (Page 73)

4–20 Configuration Menus
The IGP/PGL Emulation Submenu
CR = CR*
CR = CR + LF LF = LF*
LF = CR + LF 16*
15 Disable*
Enable 1–125
126*
127–255 Disable*
Enable
Select Font Power On
IGP/PGL
Ext Execute
Copy
Disable*
Enable
UPC
Descenders
Enable*
Disable
IGP/PGL
Emulation
Auto
Uppercase
Disable*
Enable
Skip Cmd
Prefix
Enable*
Disable Enable*
Disable
Select LPI
6* , 8, 9, 10
Compressed
CPI Ignore
Char. Compatbl.
Mode
None*
MVP
L150
P3000
P6000
P9000
Ignore
Mode
0*
0–255
Disable*
Light Font
Dark Font
Disable*
Enable
Expanded
Font
Scalable*
Block
Alt Block 1
Alt Block 2
Optimized
Ratio
True Form
Slew
Enable*
Disable
Printer
PI Line
Enable*
Disable
I-2/5
Selection
Leading Zero*
Trailing Space
X2 DPD
Slash 0
Disable*
Enable
See page 4–26
Define CR
Code PI slew
range Autowrap Select
SFCC Define LF
Code CR edit
Select
Char
* = Factory default
Disable*
Enable
Define CR Code (Carriage Return)
This parameter forces the printer to insert an automatic Line Feed code into the data
stream whenever a Carriage Return code occurs. This is to be used only if the host
computer does not send Line Feeds to the printer.
•
CR = CR. Does not perform a line feed. The next print position will be
print position 1 of the current line.
•
CR = CR + LF. Performs an automatic line feed. The next print position
will be print position 1 of the next line.