Printronix Series 5 - Manual (Page 157)

4–104 Configuration Menus
Serial Submenu
Serial
(From 4–97 )
XON / XOFF *
ETX / ACK
ACK / NAK
Series1 1 Char
Series1 2 Char
DTR
Data Protocol Baud Rate
9600*
600 thru
115200 Baud
Word Length
1 *
2
Stop Bits
8*
7
None *
Odd
Even
Mark
Sense
Parity
Interface
Type
RS 232*
RS 422
Data Term
Ready
Request to
Send
On–line and BNF*
Off–line or BF
False
True True*
On–Line and BNF
Off–Line or BF
On–Line
False
Buffer Size
in K
1 *
(1–16)
Poll Character
xx Hex
Idle Response Poll Response
xx ms
0*
0–FF
0*
0–30 Disable*
Enable
* = Factory default
One Char
Enquiry
Disable*
Enable
Interface Type
This parameter allows you to select either the RS–232 or RS–422 serial port
interface.
Data Protocol
You can select one of the following serial interface protocols to meet the host
interface requirements.
•
XON / XOFF: The printer controls the flow of communication from the
host by turning the transmission on and off. In some situations, such as
when the buffer is full or the timing of signals is too slow or too fast, the
printer will tell the host to stop transmission by sending an XOFF