Printronix Series 5 - Manual (Page 33)

2–22 Setting Up the Printer
A
B
C
Thin Paper
Medium Paper
Thick Paper
Figure 2–3. Forms Thickness Lever
9. Lower the forms thickness lever. Set it to match the paper thickness.
(The A–B–C scale corresponds approximately to 1–, 3–, and 6–part paper
thickness.)
NOTE: Do not set the forms thickness lever too tightly; excessive friction
can cause paper jams, ribbon jams with potential for ribbon
damage, smeared ink, or wavy print.
10. For pedestal models, manually feed the paper through the rear paper exit by
using the vertical position knob.
11. Close the cabinet front door.