Printronix Series 5 - Manual (Page 70)

Configuration Menus 4–17
ACTIVE IGP EMUL Menu
ACTIVE IGP EMUL
IGP/PGL*
IGP/VGL
* = Factory default
(From 4–13 )
This ACTIVE IGP EMUL function allows the user to activate either the PGL or the
VGL emulation. There are two methods for selecting the desired emulation. The
first is by selecting the emulation directly from the printer menu. The second is by
sending a host command which will switch the emulation automatically. To switch
from VGL mode to PGL mode, you must be in Graphic Mode.
The command to switch to PGL is SFCC I EMUL, PGL. To switch to VGL from
PGL, you must be in Normal Mode. The command to switch to VGL is SFCC
EMULATION; VGL.
When changing from one IGP emulation to the other, the printer will load the
saved configuration. Thus, any setting performed before selecting those
interfaces and not saved in NVRAM will be lost.
IMPORTANT
!
In order to configure an IGP emulation, the IGP emulation
must be selected in the ACTIVE IGP EMUL menu.
The IGP emulation that is not selected will not appear in
the emulation menu.