Unpacking the printer – Printronix Series 5 User Manual
Page 17
2–6
Setting Up the Printer
Unpacking the Printer
CAUTION
To avoid shipping damage, reinstall the shipping restraints whenever
you move or ship the printer.
Save the cardboard packing, foam blocks, and bubble wrap along with the other
packing materials, in case you need to move the printer later. If it is necessary to
move the printer, reinstall the shipping restraints, reversing the steps in this section.
Envelope
Cardboard
Packing (2)
1.
Raise the printer cover.
2.
Remove the cardboard packing.
3.
Open the tractor doors. Push the tractor locks down. Slide the tractors
outward as far as they will go. The forms thickness lever should be in the
fully open (raised) position.
4.
Remove the envelope that contains the sample configuration printout. Store
this in the pouch that is attached to the left interior side of the cabinet.