Printronix Series 5 - Manual (Page 30)

Setting Up the Printer 2–19
Load the Paper
When you start this procedure, verify that the printer cover is open, the forms
thickness lever is raised, and the tractor doors are open. (See Figure 2–2 .)
EDGE OF
PAPER
BOX
1. For cabinet models, align the paper supply with the label on the floor. Make
sure that the paper pulls freely from the box.
Paper Slot is
8” below
printer base
Paper Slot
2. Feed the paper up through the paper slot. Hold the paper in place with one
hand (to prevent it from slipping down through the paper slot) while pulling it
through from above with your other hand.