Install the ribbon – Printronix Series 5 User Manual
Page 28
Advertising
![background image](/manuals/176414/28/background.png)
Setting Up the Printer
2–17
Install the Ribbon
1.
Open the printer cover.
Tractor
Door
Forms
Thickness
Lever
Figure 2–2. Forms Thickness Lever
2.
Raise the forms thickness lever as far as it will go.
3.
Open the tractor doors.
Hub Latch
Hammer Bank Cover
Ribbon Mask
Ribbon Guide
4.
Squeeze the right hub latch and place the full spool on the right hub. Be sure
the ribbon feeds off the outside of the spool. Press the spool down until the
hub latch snaps into place.
Advertising