Adjusting paper supports, Release the paper chains (cabinet model) – Printronix Series 5 User Manual
Page 19
Advertising
2–8
Setting Up the Printer
Adjusting Paper Supports
Paper Supports
Tractor Door
Tractor Door
1.
Slide the paper supports inward until they are approximately four inches from
the tractor door.
Release the Paper Chains (Cabinet Model)
Tie Wrap
Paper Chains
Plastic Bags
Tie Wrap
1.
Open the rear cabinet door.
2.
Cut the tie wraps and release the paper chains from the bags at the top rear
of the printer frame. Remove the tie wraps and bags.
3.
Make sure each chain hangs freely, with no kinks or knots.
Advertising