Printronix Series 5 - Manual (Page 142)

Configuration Menus 4–89
Font Size
This parameter chooses the font size which will be used by IPDS.
•
STANDARD – The font ID will be converted to a decompressed font ID.
•
COMPRESSED – The font ID will be converted to a compressed font ID.
•
SELECT BY HOST – The font ID will be unchanged.
Graphics Quality
This parameter chooses the print quality of graphics.
•
HIGH – Graphics is printed at 144 dot rows per inch.
•
LOW – Graphics is printed at 72 dot rows per inch.
•
SELECT BY HOST – The application decides the quality of the
graphics.
Barcode Quality
This parameter chooses the print quality of bar code labels.
•
HIGH – Label is printed at 144 dot rows per inch.
•
LOW – Label is printed at 72 dot rows per inch.
•
SELECT BY HOST – The application decides the quality of the labels.
Early Print Complete
This parameter chooses when to send a Print Complete to the Controller.
•
OFF – Print Complete is sent if page is printed completely.
•
ON – Print Complete is sent immediately. The next page will be created.
This improves the print performance when starting the next page.
Graphic Scaling
This parameter chooses the scaling factor for graphics when the Mappin. Control
option of the IPDS Write Graphics Control command is SCALE TO FIT:
•
ROUNDED – Calculations are rounded up in the desired output
resolution.
•
EXACT – Graphics will be scaled as accurate as possible.