Panasonic MINAS E-series - Manual (Page 180)

180
Conformance to EC Directives/UL Standards
EC Directives
The EC Directives apply to all such electronic products as those having specific functions and directly sold to
general consumers in EU countries. These products are required to meet the EU unified standards and to be
furnished with CE Marking.
However, our AC servo meet the EC Directives for Low Voltage Equipment so that the machine or equipment
comprising our AC servo can meet relevant EC Directives.
EMC Directives
Our servo systems can meet EMC Directives and related standards. However, to meet these requirements, the
systems must be limited with respect to configuration and other aspects, e g. the distance between the servo driver
and motor is restricted, and some special wiring conditions must be met. This means that in some cases machines
and equipment comprising our servo systems may not satisfy the requirements for wiring and grounding conditions
specified by the EMC Directives. Therefore, conformance to the EMC Directives (especially the requirements for
emission noise and noise terminal voltage) should be examined based on the final products that include our servo
drivers and servo motors.
Applicable Standards
IEC: International Electrotechnical Commission
EN: Europaischen Normen
EMC: Electromagnetic Compatibility
Subject
Motor
Motor and
driver
Applicable standard
Standards referenced
by Low-Voltage
Directives
Standards
referenced by
EMC Directives
IEC60034-1
EN50178
EN55011 Radio Disturbance Characteristics of Industrial, Scientific
and Medical (ISM) Radio Frequency Equipment
EN61000-6-2 General standards for immunity in industrial environment
IEC61000-4-2 Electrostatic Discharge Immunity Test
IEC61000-4-3 Radio Frequency Electromagnetic Field Immunity Test
IEC61000-4-4 Electric High-Speed Transition Phenomenon - Burst Immunity
Test
IEC61000-4-5 Lightning Surge Immunity Test
IEC61000-4-6 High Frequency Conduction Immunity Test
IEC61000-4-11 Instantaneous Outage - Immunity Test