List of driver and compatible peripheral equipment, System configuration and wiring – Panasonic MINAS E-series User Manual
Page 26
26
System Configuration and Wiring
1-phase,
100V
1-phase,
200V
3-phase,
200V
BMFT61041N
(3P+1a)
BMFT61542N
(3P+1a)
BMFT61042N
(3P+1a)
50W
100W
200W
50W
100W
200W
400W
50W
100W
200W
400W
List of Driver and Compatible Peripheral Equipment
BBC25N
(5A)
BBC2101N(10A)
BBC25N
(5A)
BBC2101N(10A)
BBC35N
(5A)
BBC3101N(10A)
0.75mm
2
-
0.85mm
2
AWG18
0.3kVA
0.4kVA
0.5kVA
0.3kVA
0.5kVA
0.9kVA
0.3kVA
0.5kVA
0.9kVA
Magnetic contactor
(composition of
contacts)
Circuit breaker
(rated current)
Required
Power
(rated load)
DV0P4160
Cable
diameter
(L1, L2, L3,
U, V, W, E)
Output
Power
voltage
Series
MKDE
MLDE
MKDE
MLDE
MKDE
MLDE
Driver
Noise filter
Circuit breaker, magnetic contactor: manufactured by Matsushita Electric Industrial Co., Ltd.
For compliance with EC Directives, don’t fail to connect the circuit breaker (with LISTED, Mark), which is
authorized and certified under IEC and UL Standards, between the power supply and the noise filter.
Noise filter
For DV0P4160, refer to Page 182.
< Remarks >
• For wiring to the power connector, motor connector and earth terminal, use the copper conductors of 60
°C and
over in the temperature rating.
• For the connector-side earth cable, use the cable of 0.75 mm
2
- 0.85 mm
2
(AWG18) in diameter.
• For the mounting screw-side earth cable, use the cable of 2.0 mm
2
(AWG14) or more in diameter.
• Where two or more drivers are used and the noise filters for the drivers are mounted in set in the power unit, feel
free to consult with the noise filter manufacturer.