Panasonic MINAS E-series - Manual (Page 8)

8
Safety Precautions
Important
See the following precautions in order to avoid damages on machinery and injuries among the
operators and other people during the operation.
The following symbols are used to indicate the degrees of hazard seriousness possibly occurred when
you fail to comply with the safety precautions.
The following symbols indicate what you must do.
DANGER
CAUTION
Indicates a potentially hazardous situation, which if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which if not avoided, will result in
minor injury or physical damage.
Indicates that the operation is prohibited to do.
Indicates that the operation must be done.
Do not subject the product to water,
corrosive or flammable gases, and
combustibles.
The failure could result in
fire.
Do not expose the cables to sharp
objects, excessive pressing or
pinching forces, and heavy loads.
The failure could result in
electric shocks, damages, or
malfunction.
Do not put your hands in the servo
driver.
The failure could result in
burns, or electric shocks.
Do not touch the rotating part of the
motor while operating.
The failure could result in injuries.
Rotating Part
Do not drive the motor from the
external power.
The failure could result in
fire.
Do not touch the motor, driver, and
external regenerative resistor, since
they become hot.
The failure could result in
burns.
DANGER