Panasonic AG-HPX250EN - Manual (Page 100)

100
Clip skip
1
Press  (pause) during playback to set the
unit to the pause mode.
2
Push the Operation lever in the 
(rewind) or  (fast-forward) direction.
STILL A DV PAUS E STILL A DV
INDEX
SELECT
VAR .
V O L +
-
PB.
S TOP INDEX
MULTI /
P-IN-P REC A.DUB
PL AY /REW FF/
Camera-recorder or Remote control
On the remote control, press REW () or FF
().
Setting SEEK SELECT on the setting menu
OTHER FUNCTIONS screen to CLIP&T allows
you to cue the start of the clip and the position a
text memo is attached in sequence. (Page 152)
Adjusting the volume
With the PAGE/AUDIO MON/VAR button, adjust
the volume of the sound that is output from the
internal speaker and headphone jack.
On the remote control, press the ZOOM/VOL
button.
OSD
COUNTER RESET TITLE
STILL ADV PAUSE STILL ADV
VOL
+
-
MULTI/
P-IN-P REC A.DUB
PLAY /REW FF/
ZOOM
DATE/
TIME
PHOTO
SHOT
START/
STOP
Camera-recorder or Remote control
Viewing images on a TV/monitor
You can view the images on a TV/monitor if you
connect the unit to a monitor using a BNC cable
(not included), an AV cable (not included), or an
HDMI cable (not included).
1
Connect the camera-recorder to the TV set/
monitor. (Page 104)
2
Start playback.
• To display the information shown in the
viewfinder or on the LCD monitor on a TV
set/monitor connected with an AV cable,
press the OSD button on the remote control.
Press the OSD button again to clear the
display. However, information displayed on
video that is output from SDI OUT and HDMI
OUT is set with SDI & HDMI CHAR on the
setting menu OUTPUT SEL screen, not the
OSD button.
OSD
COUNTER RESET TITLE
MULTI/
ZOOM
DATE/
TIME
PHOTO
SHOT
START/
STOP
Checking the date and time
Press the DATE/TIME button on the remote control
to show the date and time of shooting on the
screen. The display changes as follows each time
you press the button.
Time

Date

Time and Date

No display
OSD
COUNTER RESET TITLE
MULTI/
ZOOM
DATE/
TIME
PHOTO
SHOT
START/
STOP
Useful playback functions (continued)