Panasonic AG-HPX250EN - Manual (Page 135)

135
Menu
Item Setting Notes
SYSTEM MODE Specifies the signal format used by this camera-recorder.
1080-59.94i, 1080-50i, 720-59.94P, 720-50P, 480-59.94i,
576-50i
Factory setting: 1080-59.94i (only for AG-HPX250P)
Factory setting: 1080-50i (only for AG-HPX250EN)
• When a setting is changed, the message “TURN
POWER OFF” appears. Then turn the power off and
turn it back on again.
• Not available when compiling
to a clip in one-clip recording
mode.
REC SIGNAL Selects the input signal in the DVCPRO format.
CAMERA:
Records the camera-recorder recording signal.
1394:
Records signals input to the DVCPRO/DV connector.
• This function is always set to CAMERA when the power
is turned on.
• Not available when the menu
option REC FORMAT is set
to AVC-Intra or DVCPROHD
during native recording.
• Not available when compiling
to a clip in one-clip recording
mode.
REC FORMAT Selects the recording codec as well as shooting and
recording modes.
■
When SYSTEM MODE is set to 1080-59.94i
AVC-I100/60i, AVC-I100/30PN, AVC-I100/24PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 60i, 30PN (native recording) and 24PN
(native recording).
AVC-I 50/60i, AVC-I 50/30PN, AVC-I 50/24PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 60i, 30PN (native recording) and 24PN
(native recording).
DVCPROHD/60i:
Uses the DVCPRO HD codec for recording. Use CAMERA
MODE options to set shooting mode. Recording is locked
to 60i.
■
When SYSTEM MODE is set to 1080-50i
AVC-I100/50i, AVC-I100/25PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 50i, 25PN (native recording) and 24PN
(native recording).
AVC-I 50/50i, AVC-I 50/25PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 50i, 25PN (native recording) and 24PN
(native recording).
DVCPROHD/50i:
Uses the DVCPRO HD codec for recording. Use CAMERA
MODE options to set shooting mode. Recording is locked
to 50i.
• Not available when 1080i or
720P is set in SYSTEM MODE
and REC SIGNAL is 1394.
• Not available when compiling
to a clip in one-clip recording
mode.
SYSTEM SETUP screen
___indicates the factory setting.