Other functions screen – Panasonic AG-HPX250EN User Manual
Page 151
151
Menu
OTHER FUNCTIONS screen
Item
Setting
Notes
USER FILE
Saves user files to camera-recorder memory, loads them
into camera-recorder memory or initializes them. (Page 60)
LOAD, SAVE, INITIAL
• This does not affect options in the SCENE FILE screen.
• This setting cannot be made
when REC SIGNAL is 1394.
• Not available when compiling
to a clip in one-clip recording
mode.
REMOTE
Sets the operations of the supplied remote control unit.
“Remote control setup” (Page 24 of Vol. 1)
OFF:
Operations are not accepted from any remote control.
1:
Accepts commands from the remote control set for
“operation mode 1”.
2:
Accepts commands from the remote control set for
“operation mode 2”.
1394 CONTROL
Selects the method the camera-recorder uses for
controlling external devices connected to the DVCPRO/
DV connector. (Page 106)
EXT:
Controls only the external device, but does not transfer
data to the camera-recorder for recording.
BOTH:
BOTH: Controls both the external device and the camera-
recorder, and also records.
CHAIN:
When there is no more space left for recording in the
camera-recorder, recording is automatically made to the
external device.
OFF:
No control
• Not available in AVC-Intra
mode and DVCPRO HD native
mode.
• Not available during interval,
one-shot and loop recording.
1394 CMD SEL
Determines how recording is stopped when the camera-
recorder controls an external device connected to the
DVCPRO/DV connector.
REC_P:
Engages REC/PAUSE status.
STOP:
Stops recording.
• Not available in AVC-Intra
mode and DVCPRO HD native
mode.
• Not available during interval,
one-shot and loop recording.
ACCESS LED
Determines whether or not the P2 CARD ACCESS LED
should light.
ON, OFF
TALLY LAMP
Sets lighting of the tally lamp.
OFF:
The tally lamp does not light.
FRONT:
Front tally lamp (microphone side) lights.
REAR:
Rear tally lamp (viewfinder side) lights.
BOTH:
Both tally lamps light.
CLOCK SETTING Sets the internal calendar (date).
“Setting the calendar” (Page 26 of Vol. 1)
___indicates the factory setting.