Panasonic AG-HPX250EN - Manual (Page 136)

136
SYSTEM SETUP screen (continued)
Item Setting Notes
REC FORMAT
(continued)
■
When SYSTEM MODE is 720-59.94P
AVC-I100/60P, AVC-I100/30PN, AVC-I100/24PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 60P, 30PN (native recording) and 24PN
(native recording).
AVC-I 50/60P, AVC-I 50/30PN, AVC-I 50/24PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 60P, 30PN (native recording) and 24PN
(native recording).
DVCPROHD/60P, DVCPROHD/30PN,
DVCPROHD/24PN:
Uses the DVCPRO HD codec for recording. Shooting
and recording at 60P, 30PN (native recording) and 24PN
(native recording).
■
When SYSTEM MODE is 720-50P
AVC-I100/50P, AVC-I100/25PN:
Uses the AVC-I 100 codec for recording. Shooting and
recording at 50P, 25PN (native recording).
AVC-I 50/50P, AVC-I 50/25PN:
Uses the AVC-I 50 codec for recording. Shooting and
recording at 50P, 25PN (native recording).
DVCPROHD/50P, DVCPROHD/25PN:
Uses the DVCPRO HD codec for recording. Shooting and
recording at 50P, 25PN (native recording).
■
When SYSTEM MODE is 480-59.94i
DVCPRO50/60i, DVCPRO/60i, DV/60i:
These use DVCPRO50, DVCPRO and DV codecs,
respectively. Use CAMERA MODE options to set shooting
mode. Recording is locked at 60i.
■
When SYSTEM MODE is 576-50i
DVCPRO50/50i, DVCPRO/50i, DV/50i:
These use DVCPRO50, DVCPRO and DV codecs,
respectively. Use CAMERA MODE options to set shooting
mode. Recording is locked at 50i.
• Not available when 1080i or
720P is set in SYSTEM MODE
and REC SIGNAL is 1394.
• Not available when compiling
to a clip in one-clip recording
mode.
CAMERA MODE Sets the shooting mode of the camera-recorder during
DVCPRO HD codec or SD mode at 1080i.
· When SYSTEM MODE is set to 1080-59.94i or 480-
59.94i
60i, 30P, 24P, 24PA
· When SYSTEM MODE is set to 1080-50i, 576-50i
50i, 25P
• Does not appear when
SYSTEM MODE is set to 720P.
• Not available in the following
conditions.
· When the REC SIGNAL is set
to 1394.
· When the SYSTEM MODE
setting is 1080i and the REC
FORMAT setting is AVC-Intra
codec or VFR is ON.
· When compiling to a clip in
one-clip recording mode.
SCAN REVERSE Cancels the image inversion that occurs with film lenses
and anamorphic lenses. (Page 35)
ON, OFF
Setup menu list (continued)
___indicates the factory setting.