Panasonic AG-HPX250EN - Manual (Page 145)

145
Menu
OUTPUT SEL screen
Item Setting Notes
SDI & HDMI
SELECT
Sets the type for the signal format output from the SDI
OUT and HDMI OUT terminals.
1080i/720P:
Follows 1080i, 720P settings of SYSTEM MODE.
1080i
*1 :
Outputs at 1080i even when SYSTEM MODE is set to
720P.
DOWNCON:
Down converts to SD signal and outputs.
• Not available when SYSTEM
MODE is set to 480-59.94i,
576-50i.
SDI & HDMI
CHAR
Selects whether or not to superimpose characters
on images output from the SDI OUT and HDMI OUT
terminals.
ON, OFF
SDI OUT Selects video output from SDI OUT or HDMI OUT
terminal.
ON:
Video is output from the SDI OUT connector.
OFF:
Video is not output from the SDI OUT connector.
SDI METADATA Sets metadata (UMID) superimposition onto SDI OUT.
ON:
Superimposes metadata.
OFF:
Does not superimpose metadata.
SDI EDH Sets EDH superimposition when SDI OUT is an SD signal
(480i, 576i).
ON:
Superimposes EDH.
OFF:
Does not superimpose EDH.
DOWNCON
MODE
Sets downconverter output (VIDEO OUT and DOWNCON
SDI OUT) in HD mode (1080i, 720P).
SIDE CROP, LETTER BOX, SQUEEZE
• Not available when SYSTEM
MODE is set to 480-59.94i,
576-50i.
VIDEO OUT
CHAR
Specifies whether or not characters are superimposed on
VIDEO OUT signals.
ON:
Superimposes characters.
OFF:
Does not superimpose characters.
VIDEO OUT
ZEBRA
Specifies whether or not zebra pattern is superimposed
on VIDEO OUT signals.
ON:
Displays a zebra pattern also on images output via the
VIDEO OUT connector.
OFF:
The zebra pattern is not displayed in video output from the
VIDEO OUT connector.
TC IN/OUT SEL Selects whether to use the TC IN/OUT terminal for input
(TC IN) or output (TC OUT).
TC OUT, TC IN
*1: Use this to check video when SYSTEM MODE is set to 720-59.94P (50P) and 1080i is selected.
___indicates the factory setting.