Panasonic AG-HPX250EN - Manual (Page 146)

146
Item Setting Notes
TC OUT Sets the time code type output when TC IN/OUT
connector is connected as TC OUT.
TCG:
Outputs the time code generator value of the camera-
recorder at all times.
TCG/TCR:
Outputs time code generator value during camera-
recorder recording and outputs the played back time code
during video playback.
• Not available when TC IN/OUT
SEL is set to TC IN.
TC VIDEO SYNC Sets the delay of time code output when TC IN/OUT
connector is connected as TC OUT.
RECORDING:
Outputs the unit’s time code with no delay.
This is used when performing simultaneous recording on
2 units with this unit’s time code as the master.
VIDEO OUT:
Outputs the time code in line with delay of video output
from the VIDEO OUT connector.
• Not available when TC IN/OUT
SEL is set to TC IN.
OUTPUT SEL screen (continued)
Setup menu list (continued)
___indicates the factory setting.