Panasonic AG-HPX250EN - Manual (Page 48)

48
Precautions for one-clip recording mode
• This mode will not function when the interval
recording, one-shot recording, loop recording, or
VFR recording functions are selected.
• This mode will not function when the menu option
REC SIGNAL is set to 1394.
• The menu and thumbnail operations are restricted
as follows when combining to the clip. Push
and hold the Operation lever in the  direction
(STOP) for about 2 seconds to stop combining to
the clip when switching to this mode.
· The following menu items cannot be changed.
SYSTEM MODE, REC SIGNAL,
ASPECT CONV, CAMERA MODE,
REC FORMAT, REC FUNCTION,
25M REC CH SEL
You can set VFR to ON even while
continuing to link clips by using the SCENE
FILE dial, SHTR/F.RATE dial, or the menu.
When you do so, the compiling process is
stopped, and a new clip will be created with
each recording operation thereafter.
· The following Menu items, related to the
reading/ writing of the SD memory card and
reading of the settings file, cannot be executed.
LOAD/SAVE/INIT in SCENE FILE, all options
in CARD FUNCTIONS, USER FILE and MENU
INIT in OTHER FUNCTIONS
· The following thumbnail menu items cannot be
selected and executed.
OPERATION→COPY
• The processing time to complete the recording
may take a little more time than normally to
allow the clip to be combined with subsequent
recordings.
• The fade process does not work on discontinuous
audio during playback where the recordings are
combined within the clip.
• If non-linear editing software is used on clips with
multiple combined recordings, the software may
not operate normally (as of Sep. 2011).
For the latest information on software that has
been confirmed to work with these types of clips,
visit the support desk at the following website.
http://pro-av.panasonic.net/
Using special recording modes (continued)