Panasonic AG-HPX250EN - Manual (Page 19)

19
Shooting
Digital zoom function
Assign the D.ZOOM function to USER MAIN or
any of the USER 1 – 4 buttons to enable use of the
digital zoom. (Page 39)
Each press of the USER button to which D.ZOOM
is assigned switches the zoom ratio in the following
order: OFF (x1) → x2 → x5 → x10 → OFF (x1).
• The viewfinder and the LCD monitor indicate the
zoom ratio when a setting other than OFF (x1) is
selected.
• “Using the USER buttons” (Page 39)
Please take note of the following points
regarding use of the digital zoom function.
• Digital zoom is not available when the DRS
(dynamic range stretcher) function (Page 133)
or the SCAN REVERSE function (Page 136) is
running.
• The FBC (flash band compensation) function
(Page 38) is not available when the digital zoom
function is running. The FBC function becomes
available again when digital zoom is switched
back to OFF.
• Operating the DRS function or SCAN
REVERSE function when the digital zoom
function is running switches the digital zoom
function off.