Panasonic AG-HPX250EN - Manual (Page 2)

2
• SDHC Logo is a trademark of SD-3C, LLC.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
• Microsoft ® , Windows ® , and Windows Vista ® are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/ or other countries.
• Screenshots are used in accordance with Microsoft Corporation guidelines.
• Apple
® , Macintosh ® , and Mac OS ® are trademarks of Apple Inc., registered in the United States and other
countries.
• Other model names, company names, and product names listed in these operating instructions are
trademarks or registered trademarks of their respective companies.
• This product is licensed under the AVC Patent Portfolio License for the personal and non-commercial
use of a consumer, and no license is granted or shall be implied for any use other than the personal uses
detailed below.
- To encode video in compliance with the AVC standard (“AVC Video”)
- To decode AVC Video that was encoded by a consumer engaged in a personal and non-
commercial activity
- To decode AVC Video that was obtained from a video provider licensed to provide AVC Video
Additional information may be obtained from MPEG LA, LLC (http://www.mpegla.com).
Note concerning illustrations in these instructions
• Illustrations (camera-recorder, menu screens, etc.) in these operating instructions differ slightly from the
actual camera-recorder.
• In order to display the position of terminals on the camera-recorder, the protective caps included with the
camera-recorder are not noted except in “Description of parts” (Page 16 of Vol. 1).
References
• References are shown as (Page 00).
Terminology
• Both SD Memory Cards and SDHC Memory Cards as referred to as “SD Memory Cards” in these
operating instructions.
• Memory cards that have the “P2” logo (e.g., AJ-P2C064AG, an optional accessory) are referred to as “P2
cards” in these operating instructions.
• Video that is created during a single recording operation is referred to as a “clip” in these operating
instructions.