Panasonic AG-HPX250EN - Manual (Page 78)

78
2. Slot numbers and HDD status
This section indicates on which P2 card the
pointed clip is recorded. The number of the
slot that contains the appropriate P2 card is
indicated in yellow. If the clip is recorded on
more than one P2 card, then the numbers of
all slots that contain the appropriate cards are
indicated. The numbers of the other slots are
shown in white if they contain P2 cards.
When the following P2 card is inserted, the slot
number is displayed with a pink frame.
• RUN DOWN CARD
(A P2 card on which the maximum number of
overwrites has been exceeded.)
• DIR ENTRY NG CARD
(A P2 card on which the directory structure is
not supported.)
The USB HDD section is indicated as follows:
• Other than the USB HOST mode: gray
• Not connected in USB HOST mode: gray
• HDD recognized and usable in USB HOST
mode: white
• HDD recognized and thumbnails shown in
USB HOST mode: yellow
• HDD recognized and not usable in USB
HOST: red
3. Time Display
You can set this to display the time code at the
start of clip recording (TC), the user bits at the
start of clip recording (UB), the shooting time
(TIME), the shooting date (DATE), the shooting
time date and time (DATE TIME), the clip name
(CLIP NAME) or the user clip name (USER
CLIP NAME).
• “Setting the thumbnail display mode” (Page 92)
4. Recording mode
The recording mode for the clip on which the
pointer is located is indicated.
5. System format
The format for the clip on which the pointer is
located is indicated.
6. Duration
The duration of the clip on which the pointer is
located is indicated.
7. USB HOST mode indicator
Indicated when the mode has been switched to
USB HOST.
8. Clip Number
The numbers set by the camera-recorder for all
the clips recognised correctly by the P2 card.
These numbers are allocated in chronological
order, by shooting dates and times.
If clips cannot be played because of different
recording formats, they are displayed in red.
9. Defective Clip Indicator and
Unknown Clip indicator
This marker is displayed for defective clips,
which may result from a variety of causes, e.g.,
powering-down during recording.
Clip with yellow defective clip indicators can be
restored in some cases.
• “Restoring clips” (Page 85)
A clip displayed with a red corrupt marker
cannot be restored and must be deleted. If the
clip cannot be deleted, format the P2 card.
is displayed for clips such as those which
differ in format from the P2 standard.
10. Incomplete Clip Indicator
Indicates that although a clip is recorded across
multiple P2 cards, one of these cards is not
inserted into a P2 card slot.
11. Shot Mark Indicator
This marker is displayed for a clip with a shot
mark attached.
• “Shot mark” (Page 82)
12. Indicator for clips with proxy
This is displayed on clips for which proxy
recorded on a proxy supporting P2 camera
recorder such as an AJ-HPX3100 is attached.
13. Text Memo Indicator
This marker is displayed for a clip with a text
memo attached.
14. Edit Copied Clip Indicator
This marker is displayed on a clip when the
model supports edit copy, such as the AJ-
HPM200. For more information about edit
copying, see the instruction manual for a mode
that supports edit copying.
15. Wide Clip Indicator
This marker is displayed for clips recorded
with the 16:9 aspect ratio. However, it does not
accompany clips in HD format.
16. Thumbnail Scroll Bar
Indicates which part of the whole thumbnail is
currently being viewed.
Thumbnail operations (continued)