Panasonic AG-HPX250EN - Manual (Page 51)

51
Shooting
Setting FRAME RATE mode
1
Press DIAL SEL button to select FRAME
RATE function.
When VFR is ON, the frame rate indicator on
the viewfinder and LCD monitor flash as shown
in the diagram below, indicating that you can
alter the frame rate.
C
H
1
C
H
2
3 0 : 2 4 P N
A L C H 1 . 2
• If they are not flashing, VFR mode is OFF.
Press the SHTR/F.RATE dial to set VFR
mode to ON.
VFR mode switches between ON/OFF each
time the SHTR/F.RATE dial is pressed.
2
The FRAME RATE is set by turning the
SHUTR/F.RATE dial.
• If no operation is performed for approximately
10 seconds, the frame rate indicator
illuminates and the dial returns to a locked
state.
• The FRAME RATE mode can be set using
FRAME RATE on the setting menu SCENE
FILE screen.
Use 1080i or 720P for the frame rate function.
However, when 1080i is selected with DVCPRO
HD recording, you cannot record unless
CAMERA MODE is set to 60i (50i).