Panasonic AG-HPX250EN - Manual (Page 9)

9
Shooting
Tally lamp
Tally lamp
(Front)
Tally lamp
(Rear)
The tally lamp can be illuminated during recording
by setting the TALLY LAMP item on the OTHER
FUNCTIONS screen (Page 151) to any setting other
than OFF.
When the camera-recorder is in any of the following
states, the tally lamp blinks.
• When the remaining battery capacity runs out
(4 blinks/sec.)
• When the available recording space on the P2
card or the battery power is low (1 blink/sec.)
• When removing the P2 card during access
(4 blinks/sec.)
• When there is no recording space left on the P2
card (4 blinks/sec.)
• When there is a warning for GENLOCK IN
terminal signal distortion, system error, or a
recording defect. (4 blinks/sec.)