Panasonic AG-HPX250EN - Manual (Page 95)

95
Playback
• Deleting only the respective items of
LOCATION (recording location data)
in SHOOT is not possible. By setting
ALTITUDE to empty, other LONGITUDE/
LATITUDE items are collectively deleted.
• The metadata for a clip with the
incomplete clip indicator cannot be
modified. For the clips recorded on multiple
P2 cards, modify the metadata while all P2
cards are inserted.
• Any MEMO with 101 characters or more
cannot be modified.
P2 card status display
■
P2 Card Status Display Settings
Select PROPERTY → CARD STATUS from the
thumbnail menu to set the desired indication mode
(remaining free space or used memory capacity)
for the P2 card status display.
1
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
The thumbnail screen appears on the LCD
monitor.
2
Press the MENU button and select
PROPERTY → PROPERTY SETUP → P2
CARD CAP from the thumbnail menu.
The following screen appears. Select the P2
card status display settings from the P2 CARD
CAP menu option.
REMAIN:
Show remaining free space on the P2 card as the
P2 card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as
the P2 card status display.