Panasonic AG-HPX250EN - Manual (Page 50)

50
If all modes and speeds are available, the display
changes in the following order:
■
When SYSTEM MODE is set to 1080-59.94i,
720-59.94P, 480-59.94i
For 60i and 60P recording
(1/15) (1/30) 1/60 1/100
1/250
S/S 1/120
1/500 1/1000 1/2000
For 30P recording
(1/7.5) (1/15) 1/60 1/100
1/250
S/S 1/120
1/500 1/1000 1/2000
For 24P recording
(1/6) (1/12) 1/60 1/100
1/250
S/S 1/120
1/500 1/1000 1/2000
• The bracketed ( ) speeds cannot be selected
when VFR is on.
■
When SYSTEM MODE is set to 1080-50i,
720-50P, 576-50i
For 50i and 50P recording
(1/12.5) (1/25) 1/50 1/60
1/250
S/S 1/120
1/500 1/1000 1/2000
For 25P recording
(1/6.25) (1/12.5) 1/50 1/60
1/250
S/S 1/120
1/500 1/1000 1/2000
• The bracketed ( ) speeds cannot be selected
when VFR is on.
Adjusting the shutter speed (continued)
Setting SYNCHRO SCAN mode
1
Select SYNCHRO SCAN in the SHUTTER
mode.
• Turn the SHTR/F.RATE dial, the value
displayed after 1/2000 is the current
SYNCHRO SCAN setting value. Select this
value.
2
Press DIAL SEL button to select SYNCHRO
SCAN function.
3
Turn the SHTR/F.RATE dial.
• It is possible to set the SYNCHRO SCAN
shatter speed.
• The shatter speed is set higher by pushing
and turning SHTR/F.RATE dial.
Range of variation in each mode
■
When SYSTEM MODE is set to 1080-59.94i,
720-59.94P, 480-59.94i
• 60P/60i mode: 1/60.0 to 1/249.8
• 30P/30PN mode: 1/30.0 to 1/249.8
• 24P/24PA/24PN mode:
1/24.0 to 1/249.8
■
When SYSTEM MODE is set to 1080-50i,
720-50P, 576-50i
• 50P/50i mode: 1/50.0 to 1/250.0
• 25P/25PN mode: 1/25.0 to 1/250.0
■
Setting the menu option SYNC SCAN TYPE
in the SCENE FILE screen to deg provides a
guide to setting and displaying shutter angle.
(Page 132)
• 3.0 d to 359.5 d
• If SYSTEM MODE setting is changed, shutter
speed may also be changed.